you are here » home » Products » Intelligent Sensors  
Intelligent Sensors    
Smoke Detector
Monitoring for developing smoke is an essential aspect in the security and safety of any facility. AKCP has designed a smoke sensor specifically for use with its sensorProbe and securityProbe productline. These smoke detectors are easy to install and configure and can be used in conjunction with all other of AKCP’s alerting features.
 
  Features
Accurate, cost effective Smoke Detector
On/Off alarm signal of Smoke Detected
LED indicates the status of Smoke Detector
Low profile design for ceiling mounting for maximum smoke detection.
Sensor type - open/closed contact switch
Up to 2 Smoke Detector Sensors per sensorProbe2, and 8 per sensorProbe8/securityProbe
Includes disconnect alarm that checks that the sensor is securely plugged into the sensor/securityProbe
The smoke detector can also be attached to dry contacts of a X20 or X60 unit.
With 9V battery as backup the sensor/securityProbe will still work as a smoke detector on its own
   
  Specifications:
Dry contact output: 0.045mA
Ionisation Detector Type
Suitable for installation to BS 5839 pt 6 Grade F
Powered by sensor/securityProbe unit and/or 9V Battery
Main housing: diameter 100mm, height 28mm
Loud piercing 85db alarm at 3m
Full function test button
Alarm auto-reset
Insect resistant chamber
Missing battery lockout
   
  Battery lifetime:
Zinc Carbon battery: approx. 1 year
Alkaline Energizer: approx. 4 years
Lithium battery: approx. 10 years